Our Equipment

We invest in modern, well-maintained machinery so every project is delivered with precision and consistency. In addition to the machines listed below, we also have the follow supporting equipment:


  • RJG E-dart
  • Resin dryers
  • State of the art water system
  • Multi-zone controllers for any hot system requirements
  • Hydraulic or pneumatic valve gate options
  • Multi-material colorant mixer
  • Hot water heater, able to heat to approximately 350 degrees.


CNC Machines

Machine Quantity Type X Travel Y Travel Z Travel Capacity
K211 - Fidia 1 5-axis 105 in. 43 in. 39 in. 20000 lbs.
22M GTF - Fidia 2 5-axis 86.6 in. 137.8 in. 55 in. 40000 lbs.
C650 - Hermle 1 5-axis 41.3 in. 35.4 in. 23.6 in. 6600 lbs.
K199 - Fidia 2 5-axis 63 in. 29.4 in. 30 in. 20000 lbs.
G996 - Fidia 1 5-axis 33 in. 37 in. 24 in. 4400 lbs.
C42U - Hermle 1 5-axis 31.5 in. 31.5 in. 21.6 in. 3100 lbs.
Kitamura - Bridge 8 1 Vertical 80 in. 43 in. 28 in. 7700 lbs.
VM9 - OKK 3 Vertical 81 in. 37 in. 32 in. 6600 lbs.
VM5 - OKK 2 Vertical 40 in. 20 in. 20 in. 2650 lbs.
Kitamura - Bridge 10 2 Vertical 100 in. 63.6 in. 31.5 in. 13300 lbs.
VM7 - OKK 3 Vertical 60 in. 29 in. 26 in. 3300 lbs.
VB53 - OKK 3 Vertical 40 in. 22 in. 20 in. 2650 lbs.
KBT - 11Z Bar - Kuraki 1 Horizontal 98.4 in. 78.8 in. 47.2 in. 16500 lbs.
Niigata HN1250-S 2 Horizontal 86.1 in. 70.87 in. 47.24 in. 11000 lbs.
KBH - 16 Bar - Kuraki 2 Horizontal 78 in. 59 in. 43 in. 14000 lbs.
HM 1250 - OKK 1 Horizontal 66.9 in. 55.1 in. 48.8 in. 6600 lbs.

Wire & Sinker EDM

Machine Quantity Type X Travel Y Travel Z Travel Weight Capacity
Sodick AG100 1 Sinker EDM 47 in. 25.75 in. 24 in. 15000 lbs.
Mitsubishi EA30E 1 Sinker EDM 27.3 in. 19.6 in. 13.9 in. 3000 lbs.
Gantry Eagle 1400 1 Sinker EDM 49 in. 92 in. 28.5 in. 15000 lbs.
Gantry Eagle 1200 1 Sinker EDM 39.3 in. 59 in. 26.5 in. 7500 lbs.
Mitsubishi MV 4800 1 Wire EDM 31 in. 23 in. 20 in. 6600 lbs.

Injection Molding Equipment

Machine Dimensions Between Tie Bars Maximum Mold Height Minimum Mold Height Maximum Ejector Stroke Screw Diameter Peak Plastic Pressure Intensification Ratio Maximum Shot Size Maximum Injection Speed
55 ton Milacron Magna 55T Horizontal 16.14 in. x 14.13 in. 14 in. 7.08 in. 3.46 in. 32 mm 22620 psi 1:1 99 g 66 in./sec.
60 ton J60EL3 2 in. x 12.2 in. 11.81 in. 6.3 in. 2.36 in. 27.9 mm 22770 psi 1:1 57 g 9.00 in./sec.
80 ton J80-ADS-110U (2) 16.14 in. x 16.14 in. 20.0 in. 5.9 in. 3.64 in. 35 mm 32000 psi 1:1 105 g 9.84 in./sec.
85 ton J85-AD-110H 16.14 in. x 14.13 in. 18.11 in. 7.08 in. 3.15 in. 35 mm 32,633 psi 1:1 105 g 6.66 in./sec.
110 ton J100-ADS-110U 18.11 in. x 18.11 in. 21.65 in. 5.9 in. 3.93 in. 40 mm 24,946 psi 1:1 137 g 9.84 in./sec.
110 ton J110-AD-110H 18.11 in. x 16.14 in. 17.71 in. 7.87 in. 3.93 in. 35 mm 32,633 psi 1:1 105 g 6.66 in./sec.
140 ton J140-AD-180H 20.86 in. x 18.11 in. 17.71 in. 7.87 in. 3.93 in. 45 mm 22,770 psi 1:1 203 g 5.83 in./sec.
220 ton MA 2000 20.87 in. x 20.87 in. 21.65 in. 7.87 in. 5.5 in. 50 mm 27,122 psi 11.7:1 412 g 4.36 in./sec.
530 ton MA 4700 32.28 in. x 31.5 in. 30.71 in. 12.60 in. 7.8 in. 84 mm 20,741 psi 10.2:1 125.05 cu. in. 4.28 in./sec.
730 ton JU6500 II / 4500 40.94 in. x 35.83 37.4 in. 15.75 in. 9.84 in. 80 mm 28,862 psi 11.4:1 135 cu. in. 4.68 in./sec.
900 ton MA8000 ll S/8400 39.37 in. x 39.37 in. 39.37 in. 16.54 in. 11.02 in. 110 mm 29,580 psi 10.2:1 272 cu. In. 3.76 in./sec.
1120 ton JU10,000/8400 (2) 56.3 in. x 46.5 in. 47.25 in. 25. 6in. 13.75 in. 110 mm 26,776 psi 10.5:1 155 oz 3.76 in./sec.

Plate Grinding Equipment

Machine Table Working Area Weight Capacity
Kent 820 31” x 80” 4,000 lbs.
Kent 615 23” x 59” 1,500 lbs.
Gantry 59” x 95” 10,000 lbs.